This high precision glass scale let's you measure as precisely as 0.01mm or 0.001".

Compared to the standard CS Series a further increase in the read-off accuracy is possible with the chrome micro-scale, CSM. A adapted analogue or digital dial gauge allows measurement of the distance between the one-tenth graduations. This allows precise measurements right down to one one-hundredth of a millimetre, 0.01mm.

These high precision glass scales have graduations and numbers created with vapour-coated hard chrome. Two scales are available in metric (0.10mm) and inch (0.005") increments. A white strip serves as a background on one side of the numbers to allow them to be read off more easily. The chrome scales are equipped with two anodised grips on the sides for secure handling.

Two precision magnifiers (type 2016) with 15x magnification and 12 mm field of view) in combination with two lights ensure simple, error-free read-off of the scale. The smallest increment on the inch scale is 0.005". The smallest increments on the metric scale are 0.1 millimetre.

An electronic measuring dial is available as an optional extra, which can be used as a substitute for the analogue dial. The function is the same, with the only difference being that the display of the intermediate scale values changes from analog to digital. Bear in mind that the electronic measuring dial can only transfer the intermediate values and not the total measured distance.

These valuable precision glass measuring rulers are delivered in a stable wooden case to protect them from damage and are available in lengths of 300, 500, 800, 1000 millimetres. Special lengths available on request. These glass measuring rulers have the advantage that their expansion is minimal when heated. Temperature variations therefore have hardly any effect when using chrome scale rods.

Technical specification:

 
Upper measuring scale: Increments = 0.005"
labelling (small) 0 .05 .10 .. (inches)
labelling (large) 0 1.0 2.0 ... (inches)
Lower measuring scale: Increments = 0.1 mm
labelling (small) 0 .1 .2 .. (mm)
labelling (large) 0 10 20 ... (mm)
The graduations and numbers are vapour-coated with hard chrome on the glass rods are high resolution and absolutely scratch resistant. The graduations have a thickness of 0.010 mm
The white strips facilitate reading in dark areas.
Increment accuracy in compliance with DIN 864:
± (0.003 mm + 3L / 1’000’000)
Example: L = 500 mm, graduation error <= 0.0045 mm
(dimensions based on 20°C)
Thermal coefficient of expansion: 9 x 10-6 / °C.
Refraction index = 1.5195
Material = float glass (selected)
Scaling not centred / centred on glass element! (multiple use)
Length of glass elements = nominal length in inches x 25.4 mm / inches + 49 mm
Width of glass element = 39 mm
Thickness of glass element = 6 mm
Available in lengths of (measuring range on double scale):
  300 mm /  12” = overall length 353,8 mm (± 1mm)  
  500 mm /  20” = overall length 557,0 mm (± 1mm)  
  1,000 mm /  40” = overall length 1065,0 mm (± 1mm)  
More Information
Brand PeplerOptics
Product List Attributes

• Available in lengths from 300 to 1000 mm
• Scale divisions of 0.1 mm and 0.005"
• Dial gauge for extra precision
• Measure down to 0.01 mm and 0.001"

SKU CSM-CONFIG
Country of Origin Liechtenstein
Tariff Code 90178010
Magnification 15x

Same Day Shipping | UK & International | 30 Days to Return

Our shipping rates are calculated in the basket according to the delivery address and product weight.

Order before 1pm for same day despatch (Mon - Fri) for products in stock. Lead time to shipment for all non-stock products is indicated on each product page.

UK Deliveries

Standard Delivery UK Mainland - please allow up to 5 working days

Next Day Delivery - tracked delivery by courier Monday - Friday

Some microscopes are quite heavy so the shipping rate maybe be higher.

Orders for delivery to Northern Ireland, Scottish Highlands & Islands, Isle of Wight, Isle of Man and Channel Islands maybe subject to a surcharge and take longer to deliver.

Internation Delivery

We ship worldwide using DHL.

Delivery costs will be estimated in your basket, except under certain conditions. You must enter your country and post code, or be logged into your account, to see your options for delivery and the cost for each method. In the event that you do not see any delivery options during checkout please use the Request for Quote  option for a personal quotation.

UK Vat is automatically deducted from our prices for export orders.

All orders for delivery outside UK are supplied on CPT (Incoterms) basis, which excludes insurance and any local taxes. This means that you will have to pay your local tax and any applicable duties to the carrier before receiving your delivery. Failing to do so may result in your package being returned to us.

You can find the tariff code and country of origin in the "More Information Tab" on every product page on our website. This information will enable you to estimate any local import taxes/duties which might be requested by your customs.

FAQ

Can I Request a Quote?

Yes. To request a quotation is easy, just use the Add to Quote button which can be found on all product pages next to the Add to Basket button, create an account and send your request. We aim to respond to all quote requests within 24 hours.For help visit our Request a Quote (RFQ) page.

I need a VAT invoice

All orders will receive a VAT Invoice by email after shipment.

What about Returns?

You have 30 days to return an item. All returns for credit must be unused and in a condition fit for immediate re-sale. Full details of our returns policy can be found here.

Chrome Glass Measuring Ruler, CSM Series, 0.01mm Precision

As low as £2,727.60 £2,273.00
Ships in 2-3 weeks
Only %1 left
We found similar products you might like