The Electronic Scale Ruler has become a standard instrument in the Print and Packaging, Security and Offset Printing industries where it's use makes accurate length measurements significantly easier and more reliable. The Electronic Scale is also an indispensable measuring system for the calibration of imagesetters and in the electronics industry.

Available in 7 lengths from 180mm to 1500mm and three different optical systems, the Electronic Scale is supplied with a factory test protocol so integration into your QA system is ensured.

Length measurements are achieved with the an inductive strip mounted on a hardened stainless steel guide which provides the electronics with the precise position of the measuring carriage. The guide runs on longitudinal ball bearings, free of any play and wear. The two lateral positioning slides facilitate quick, parallel alignment of the scale with the item to be measured.

An easy-to-read display with six millimetre high characters shows a maximum resolution of 0.01 millimetres or 0.0005 inches. A fine adjustment is located immediately next to the display. The vertical arresting screw arrests a part of the measuring carriage. Operation is simple with a horizontal positioning screw moving the carriage sensitively to the measuring point. The zero point for the measurement can then be set by pressing the reset button. After moving the carriage to the second measuring point the result can be read off on the display.

Optical System - 3 Variants

The Electronic Scale is supplied in three optical variants: either 10x Magnifer (ES Model), 25x Microscope (ES-25) or 50x Microscope (ES-50). 

10x Magnifier - ES Model

The ES model is supplied with a premium quality 10x Magnifier with a four coated lens optical system,10x magnification factor, making it possible to move precisely to the measuring point. The magnifier can be focussed for adjustment to suit the operator and is equipped with a glass graticule plate for exact positioning of the measuring carriage. The hard chrome vapour-coated graduations on this plate ensure precise readings.
An ingenious parallax control ensures that the viewing angle is perpendicular to the lens. Two lateral positioning slides make parallel alignment of the scale with item being measured simple and quick.

ESM-25 Microscope 25xESM-25 Microscope 25x

25x/50x Microscope - ESM Model

For very fine positioning the ESM version with microscope maybe be used. The Electronic Scale is then supplied with a 25x or 50x microscope instead of the 10x magnifier. 

The ESM microscope version avoids any possibility of parallelism errors (small deviation in readings) that may occur when using the 10x magnifier if the parallax control scale is not used properly by the operator. However, when using ESM version the image is reversed (mirrored) making it less convenient for some operators.

The 25x and 50x microscopes are fitted with a scale with graduations and cross-hairs. Converting an ES (10x) version to ESM (25x or 50x) version is possible by purchasing the microscope and adapter separately (see related accessories below). 

ES-USB CameraES-USB Camera

USB Camera (Optional)

The Electronic Ecale, ES model (10x), can be ordered with a video system for convenient series measurements. Then deviations resulting from parallelism are avoided and the image is not reversed.

The USB Camera enables movement to measuring points using either the graticule plate or the software reference functions such as cross hairs all on a conveniently mounted monitor (not included). Using the USB camera also relieves the operator as they are not bending over to place their eye against the magnifier or microscope.

USB Camera option can only be fitted to the ES model, not the ESM. Existing ES models can also be upgraded with the camera later.

To order add product ES-USB which can be found with the Related Accessories area below

Download Technical Data Sheets for more details.

 

Available standard lengths 180 mm / 7 Inch
  300 mm / 12 Inch
  500 mm / 20 Inch
  800 mm / 32 Inch
  1000 mm / 40 Inch
  1300 mm / 52 Inch
  1500 mm / 60 Inch

Resolution 0.01 mm / 0.0005 Inch
Repetition accuracy 0.01 mm.

Error band width up to 500 mm = 0.03 mm
  up to 800 mm = 0.04 mm
  up to 1000 mm = 0,05 mm
  up to 1300 mm = 0,10 mm
  up to 1500 mm = 0,15 mm

LCD display, lithium battery 3V, Life expectancy approx. 4000 h
Temperature range: +10 to +40°C
RS232 compatible interface
Reticule plate: Standard or PCB
Wooden Transport Box included

Download the Technical Data Sheets for more details. Delivery time is usually 3-4 weeks from receipt of order.

More Information
Brand PeplerOptics
Product List Attributes

• Available in lengths from 180 to 1500 mm
• Digital Readout with parallax control
• Measurement resolution 0.01 mm or 0.00005 inch
• Optional Camera

SKU ES-CONFIG
Country of Origin Liechtenstein
Tariff Code 90178010

Same Day Shipping | UK & International | 30 Days to Return

Our shipping rates are calculated in the basket according to the delivery address and product weight.

Order before 1pm for same day despatch (Mon - Fri) for products in stock. Lead time to shipment for all non-stock products is indicated on each product page.

UK Deliveries

Standard Delivery UK Mainland - please allow up to 5 working days

Next Day Delivery - tracked delivery by courier Monday - Friday

Some microscopes are quite heavy so the shipping rate maybe be higher.

Orders for delivery to Northern Ireland, Scottish Highlands & Islands, Isle of Wight, Isle of Man and Channel Islands maybe subject to a surcharge and take longer to deliver.

Internation Delivery

We ship worldwide using DHL.

Delivery costs will be estimated in your basket, except under certain conditions. You must enter your country and post code, or be logged into your account, to see your options for delivery and the cost for each method. In the event that you do not see any delivery options during checkout please use the Request for Quote  option for a personal quotation.

UK Vat is automatically deducted from our prices for export orders.

All orders for delivery outside UK are supplied on CPT (Incoterms) basis, which excludes insurance and any local taxes. This means that you will have to pay your local tax and any applicable duties to the carrier before receiving your delivery. Failing to do so may result in your package being returned to us.

You can find the tariff code and country of origin in the "More Information Tab" on every product page on our website. This information will enable you to estimate any local import taxes/duties which might be requested by your customs.

FAQ

Can I Request a Quote?

Yes. To request a quotation is easy, just use the Add to Quote button which can be found on all product pages next to the Add to Basket button, create an account and send your request. We aim to respond to all quote requests within 24 hours.For help visit our Request a Quote (RFQ) page.

I need a VAT invoice

All orders will receive a VAT Invoice by email after shipment.

What about Returns?

You have 30 days to return an item. All returns for credit must be unused and in a condition fit for immediate re-sale. Full details of our returns policy can be found here.

Electronic Length Measuring Scale Ruler

As low as £2,640.00 £2,200.00
Made To Order, ships in 3 - 4 weeks
Only %1 left
We found similar products you might like